Shortform Catalogue

Zone 2 Endura

Site Map


key key key key key
key key key key key
key key key key Key

Application: The PITBUL - ENDURA luminaires are equipped with electronic ballast and inductive light source ENDURA. The advantage of the source is very long operation life (approx. 60 000 hours). The luminaire equipped with the source is suitable mainly for the areas with diffucult and expensive change of the light source. The fixture consists of a few main parts: body, cover and reflection metal sheet with electrical components.

Body: The body of the fixture is produced from white painted metal sheet or stainless steel. On both ends of the fixure, there are holes for for plastic or nickel-plated cable glands M20x1,5 or M25x1,5.

Cover: The cover is made of the hardened glass. The joint of the body and the glass is solved by means of three hinges on the one side and three screws on the other side. The level of the coverage is guaranteed by the profile sealing which is inserted in the body of the fixture.

Reflector: The reflector from white painted meta sheet, 0.5 mm thick, is put in the basic body. The electric components are mounted on it.

System of fastening: The fixtures can be fastened by means of fixing screws on the ceiling or on the wall of illuminated space. It is prepared the frame for the possibility to install the fixture in the recessed ceiling.

Type of luminaire A [mm] B [mm] C [mm] D [mm]
PITBUL - ENDURA 701 302 130 450

Endura dimensions