Application:
Dustproof lighting fixture (MULTI)EXTEND-EX-P-LED with splash water resistance is designed for lighting of areas with danger of explosion.

Ballast:
EP – electronic 110 – 254 V, 50/60 Hz; 220 – 250 V, 0 Hz DC

Light source:
LED, 4000K, CRI +80

Housing:
Plastic material GRP (Fiberglass filled polyester), Grey Colour RAL 7035

Diffuser:
PC (polycarbonate) TRANSPARENT

Fastening:
Direct mounting with 2 x M8 threaded inserts in base.
For other options please see below.

Connection:
Screwless three- or four-pole terminal block, maximum diameter of wires 4 mm2

Standard equipment:
1pc Exe plastic cable gland M25x1.5 (as a standard for diameter of cable 12-18mm), 2 pc Exe plastic plug M25x1.5.

Calculated lifetime – LED modules:
L80B50 ta55 – 50 000h

On request:
MULTI-1/3 – maintained emergency lighting
EM-1/3 – non-maintained emergency lighting
BKT – Fixed stainless steel ceiling/wall mounting bracket
45BKT – 45deg stainless steel wall mounting bracket
ECP20 – Earth continuity plate, 2 x 20mm entries and nitrile rubber bonded seal washers
PM50 – 50mm pole mounting bracket
NANO – lighting fixtures can be protected by special nano-layer (hydrophobic, oleophobic or antibacterial protection)
3000K, 4000K or 6000K – colour temperature
1/3 F – single-phase or three phase through wiring connection, maximum diameter of wires 2.5mm2

EXTEND-EX-P-LED, MULTIEXTEND-EX-P-LED, EXTEND-EX-P-LED-Em
EX II 2G Ex db eb mb op is IIC T4 Gb
EX II 2D Ex tb op is IIIC T71°C Db

EXTEND-EX-P-LED-WOD
EX II 2G Ex eb mb op is IIC T4 Gb
EX II 2D Ex tb op is IIIC T71°C Db